Fireplace installation around Jonesville, FL

No fireplace in the room yet? Local pros plan one around your room in Jonesville, starting with a free visit.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

A fireplace on an upstairs floor

Hoping for a fireplace in an upstairs room? A heavy masonry fireplace is rarely practical there, but factory-built, gas and electric units can be. The floor still has to carry the unit and its hearth, and the building code wants the structure supporting a factory-built chimney designed for the load.

Floor framing and the route for any chimney or vent decide which units suit, and our specialists recommend from there. If the floor needs reinforcing, that's named on the quote with the trade that does it. Ask our pros about an upstairs fireplace in Jonesville by phoning (352) 675-6366.

From the Gainesville reference point, Jonesville is about 10 miles away in a direct line. Jonesville is one of the Alachua County places our pros cover.

What's Included

New fireplaces for homes in Jonesville

Listed doors fitted to factory-built units
Outside air supplies planned with the fireplace
Break-in steps given for units installed in Jonesville
Installs in Jonesville under our workmanship warranty

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Additions and new rooms

Adding a room to a home in Jonesville? That's the easiest time to plan a fireplace, with the footing, framing, chimney route and air supply built in from the start. Our specialists work with your builder, and the quote separates our fireplace work from the builder's construction. Planning early saves opening finished walls later, and it keeps the fireplace in proportion with the new room.

Our Process

Building your fireplace in Jonesville

Look at the room

The wall, floor, attic and roof are looked at, then the fireplace options that fit are laid out.
Plan and price

You choose a unit, and the quote lists every part, trade, permit and inspection.
Install and check

The unit and its chimney or vent go in to the manual, with clearances checked before walls close.
Test and hand over

The unit is tested, you're shown how to use it, and you get the break-in steps noted on the quote.

Why Choose Us

Every kind of new fireplace, one local company

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Local, family-run fireplace specialists who stay reachable after the install in Jonesville.

Your written price is freeEach fireplace option for your room is given its own price, free and side by side.
Family owned and runFamily-run planning for your fireplace in Jonesville, as careful as if it were going in our own home.
100% satisfaction, guaranteedThe install isn't done until you're happy with it. That's our 100% satisfaction guarantee.

Call (352) 675-6366 Get a Free Inspection

How deep a masonry firebox has to be

Firebox proportions depend on the fireplace design. Standard masonry and Rumford-style arrangements have different requirements, and depth must be considered with the opening, throat and flue. Our pros discuss the proposed design before choosing dimensions or pricing the masonry.

Opening size, depth, throat and flue need to be planned together. Our pros explain the proposed arrangement and any questions that must be resolved before construction, rather than promising draft performance from a single dimension.

A Rumford-style fireplace has its own proportions and may be worth discussing where that design suits the project. Its appearance, construction and venting requirements belong in the planning conversation before it is compared with a standard masonry fireplace.

Planning combustion air

A wood fireplace needs air to burn. Outside combustion air is what the Florida Building Code asks for, except in rooms kept at neutral or positive pressure by mechanical ventilation.

Where outside air is used, the code controls where the intake may draw from: outdoors, or a ventilated crawl space or attic, and not a garage or basement. It also wants listed ducts where the unit calls for them, and a corrosion-resistant screen over the intake.

Planning the air supply with the fireplace is simpler than adding it after the walls are finished, and it's priced on its own line.

Swapping out an old factory-built unit

Swapping a factory-built fireplace isn't as simple as sliding a new box into the old hole. The old chimney was listed with the old unit, and a new unit from another maker, or even a newer model, needs the chimney listed with it.

Some makers offer a matching replacement that works with the existing chimney; if yours doesn't, a new chimney is planned with the new unit.

The old unit and chimney come out, the opening is checked and adjusted to the new unit's framing dimensions, and the new system goes in to its manual. Each stage is priced.

Free Inspection

Measured before anything is quoted

The wall, floor and space above where the fireplace would go
Hearth extension size and material for the unit chosen
Gas line or new circuit needs, and who will do them
Permit needs and the inspections the job is likely to have

Claim 10% off your first service

Planning a fireplace in Jonesville? Book your first install today for 10% off.

Call (352) 675-6366 Get a Free Inspection

FAQs

What to decide before an install in Jonesville

Will the new fireplace need a permit?

Generally yes, and the local building department inspects the framing and the finished install. Our pros put on the quote who pulls the permit and whether the fee is included.

Is a fireplace install covered by a warranty?

Two warranties apply: ours on the workmanship of the install, and the maker's warranty on the unit applies under its own terms. Reserve your free planning visit in Jonesville at (352) 675-6366.

Our Services