Your gas fireplace, planned right in Brooker

Replacing an old gas unit? Get a free visit in Brooker and a new one installed to its listing.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Homes that run on propane

A propane installation needs a fireplace approved for that fuel and a suitable supply arrangement. Any conversion requires the parts and procedure permitted for the particular model. The gas contractor can address the supply side while the fireplace proposal identifies the appliance and its installation needs.

Our specialists make sure the unit is set up for propane, and your propane supplier or a gas contractor handles the tank and the line. The quote names each part. If you're switching from natural gas to propane, or the other way, the conversion kit is fitted to the maker's instructions. Call our pros about a propane gas fireplace in Brooker: (352) 675-6366.

About 14 miles, measured point to point, lie between Brooker and the Gainesville reference point. Our specialists serve Brooker as part of Bradford County.

What's Included

Direct-vent units, fitted to the manual

Openings framed to the manual's dimensions
Gas line work coordinated with a gas contractor
Circuits coordinated with an electrician
Gas inserts fitted with full-height liners

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Homes on propane inland

If your home in Brooker runs on propane, a gas fireplace can run on it too, set up for propane at the factory or converted using the maker's kit. The tank stays outdoors.

Your supplier or a gas contractor handles the tank and the line. Our pros make sure the unit is set up for propane and started up to its plate. Conversion kits come from the unit's own maker.

Our Process

Vent route settled before the unit arrives

Trace the vent routes

Walls, attic and roof are measured against the vent tables and termination clearances.
Choose and plan

You pick a unit, and the plan covers framing, gas, power and every trade involved.
Install to the manual

The unit is set, the vent assembled and pitched, and the gas contractor connects the line.
First flame and a walkthrough

Leak test, pressures, logs and barrier are checked, and you're shown how to use it.

Why Choose Us

Every trade named on your quote

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Units in Brooker are installed to their own manual, from framing to the barrier screen.

Your written price is freeEach unit that fits, with its vent route, is given its own price for free, side by side.
Locally owned and operatedYour installer is locally owned and can service the gas fireplace in Brooker later on.
No hidden fees, all upfrontNo hidden fees: vent parts, framing checks and startup are all on the written price.

Call (352) 675-6366 Get a Free Inspection

Keeping exhaust away from windows and doors

Exhaust leaving the termination shouldn't find its way back into the house. That's why each manual carries a clearance table, drawn from the national fuel gas code, that sets how far the termination must sit from windows and doors that open.

The distance can depend on the unit's input rating, and permanently closed windows have their own figure.

Every opening near the proposed spot is measured and compared with the table in your unit's manual. If the spot fails, our pros move it or recommend a roof termination. Those measurements are written into the plan. Nothing is cut until the spot passes.

The bedroom question

Sleeping rooms come with restrictions on gas appliances under the fuel gas code. Direct-vent units that take all their combustion air from outside can go in a bedroom where their listing allows it, and vented gas fireplaces can only under conditions the code sets, including room volume.

Unvented appliances have their own, tighter rules.

No model gets recommended until your unit's listing and the room's size are checked against those rules. If the room doesn't qualify for the unit you like, our pros show you one that does. The rule and the reasoning go on the quote. Unvented units get a closer look still.

Fitting the barrier screen

The glass on these units gets hot enough to burn. The 2015 revisions to ANSI Z21.88 and Z21.50 brought in barrier screens for units whose glass exceeds a set temperature, and newer units ship with one that's meant to stay installed.

During installation, the barrier is fitted and checked to sit properly in front of the glass. It's easy to leave off when the finish is going on, and it shouldn't be.

In homes with children or pets, it's one of the most important parts of the whole installation, and it's pointed out at handover. If the screen is ever removed for cleaning, it goes back ahead of your next fire.

Free Inspection

Vent tables and clearances, checked in Brooker

Bedroom rules and the unit's listing, where it applies
Gas supply location and who will run the line
Power needs, outlet location and any new circuit
Access to the control compartment once the finish is on

Claim 10% off your first service

Book your first install today and your new gas fireplace in Brooker is 10% off.

Call (352) 675-6366 Get a Free Inspection

FAQs

Planning a gas fireplace? Ask us

Can you install a gas fireplace in Brooker?

Yes, we install gas fireplaces in Brooker and across Bradford County. A free planning visit traces the possible vent routes first. Picture where you'd like the unit before we arrive.

Can a gas fireplace go in a bedroom?

The fuel gas code limits it. Direct-vent units that take all their air from outside can go in a bedroom where their listing allows. Our pros check the room and the listing first.

Our Services