Jonesville gas fireplace installs, vent first

The vent route gets settled before anything else. A free planning visit starts every gas fireplace job in Jonesville.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Planning the wall around the fireplace

Planning stone, tile or a mantel around the new fireplace? Each gas fireplace manual has rules for what can surround it: which materials must be noncombustible, how close a mantel can be, and how far it can stick out, laid out in a chart.

Walking through that chart with you before the wall is finished means the mantel height and the facing work from the start. Some units allow a TV above them; others don't. The finish carpentry and tile are named on the quote with the trade that does them. It's the step that heads off rework. Ask our pros about the wall around your fireplace in Jonesville by phoning (352) 675-6366.

From the Gainesville reference point, Jonesville is about 10 miles away in a direct line. Jonesville is one of the Alachua County places our pros cover.

What's Included

Gas fireplace installs for homes in Jonesville

Roof-vented units with the maker's roof parts
Propane units set up or converted with the maker's kit
Barrier screens fitted at startup
Installs in Jonesville with our workmanship warranty behind them

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Gas heat for an addition

Adding a room to a home in Jonesville? Planning a gas fireplace during the addition means the framing, vent route, gas line and power are built in from the start. Our specialists work with your builder, and the quote separates our fireplace work from the construction. Framing, gas and power are planned together with the builder's schedule. Planning early also avoids opening finished walls later on.

Our Process

Planning a gas install in Jonesville

Trace the vent routes

Walls, attic and roof are measured against the vent tables and termination clearances.
Choose and plan

You pick a unit, and the plan covers framing, gas, power and every trade involved.
Install to the manual

The unit is set, the vent assembled and pitched, and the gas contractor connects the line.
First flame and a walkthrough

Leak test, pressures, logs and barrier are checked, and you're shown how to use it.

Why Choose Us

Specialists for direct-vent gas units

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Local, family-run gas fireplace installers who come back to service what they fit in Jonesville.

Your written price is freeEach unit that fits, with its vent route, is given its own price for free, side by side.
Locally owned and operatedYour installer is locally owned and can service the gas fireplace in Jonesville later on.
No hidden fees, all upfrontNo hidden fees: vent parts, framing checks and startup are all on the written price.

Call (352) 675-6366 Get a Free Inspection

Why the vent route comes first

Where a gas fireplace can go depends on where it can vent. The maker's vent tables set how far the pipe can run horizontally for a given vertical rise, how many elbows it can take and where it can end, and those limits decide which walls work.

Every plan starts by tracing the possible vent routes, through the wall behind the unit or up through the ceiling and roof, and checking them against the tables.

Only then do our pros talk about models and finishes. It saves you from falling for a spot on the wall that the vent can't reach.

Venting out the back or out the top

Many direct-vent units ship set up to vent out the back and can be converted to vent out the top, following the manual's steps. Rear venting suits a unit on an outside wall; top venting lets the pipe rise before it turns out the wall or goes up through the roof.

Which one your installation uses depends on the wall, the framing and the vent table.

Our specialists choose the setup that gives the cleanest route, convert the unit if needed, and note it on the plan. A top-vented unit may need a taller frame, and that's planned in. Either way, it's the manual's steps.

Terminating through the roof

When the vent goes up through the roof, the manual sets how high the termination has to stand above the roof and away from nearby walls. The vent maker supplies the roof flashing and storm collar that seal around the pipe.

Those parts go on to the vent maker's instructions. Where the roof covering around the pipe needs to be cut back and reset, or a tile or metal roof needs special handling, a roofer does that part, and the quote names them.

The attic run between the unit and the roof keeps its listed clearances and fire stops.

Free Inspection

Planned and measured before any price

Attic and roof route for a vent that goes up instead
Gas supply location and who will run the line
Access to the control compartment once the finish is on
Existing unit and vent when replacing an old fireplace

Claim 10% off your first service

Take 10% off your first gas fireplace service with our family business.

Call (352) 675-6366 Get a Free Inspection

FAQs

What to ask before a gas install in Jonesville

Can you install a gas fireplace in Jonesville?

Yes, we install gas fireplaces in Jonesville and across Alachua County. A free planning visit traces the possible vent routes first. Picture where you'd like the unit before we arrive.

Is a gas fireplace install covered by a warranty?

The install gets our workmanship warranty, and the maker's warranty on the unit applies under its own terms. Reserve your free planning visit in Jonesville at (352) 675-6366.

Our Services