New gas fireplaces fitted in Williston, FL

Installed to the maker's manual, with the gas line run by a gas contractor. Free planning visit for homes in Williston.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Venting straight out the wall

An outside wall can give a direct-vent fireplace a possible route to the outdoors. The appliance's venting instructions determine whether that route is suitable, including the pipe arrangement and permitted termination position. Windows, other openings and nearby surfaces need checking before the location is chosen.

Outside that wall, our specialists look for windows, doors, soffits, a porch or anything else the maker's clearance table rules out, since the termination has to sit at set distances from each. If the wall passes, the install is straightforward. You'll see the plan and the price before anything is ordered. Reserve a through-the-wall planning visit in Williston: (352) 675-6366.

Williston is on our Levy County list of places we serve. When the 2020 Census counted Williston, it found 2,976 residents.

What's Included

Vent route, unit, finish and startup

Openings framed to the manual's dimensions
Floors under units prepared as the manual says
Propane units set up or converted with the maker's kit
Installs in Williston with our workmanship warranty behind them

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Metal roofs and a new vent

Under a metal roof in Williston, a roof-vented gas fireplace needs the vent maker's roof piece and a roofer who knows how to seal metal panels around it. Our specialists coordinate the opening and the parts with your roofer, and the quote shows which part of the job belongs to whom.

Our Process

Your gas fireplace, from plan to first flame

Trace the vent routes

Walls, attic and roof are measured against the vent tables and termination clearances.
Choose and plan

You pick a unit, and the plan covers framing, gas, power and every trade involved.
Install to the manual

The unit is set, the vent assembled and pitched, and the gas contractor connects the line.
First flame and a walkthrough

Leak test, pressures, logs and barrier are checked, and you're shown how to use it.

Why Choose Us

Gas fireplaces installed to the manual in Williston

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Before a model is recommended for a room in Williston, the bedroom rules and listing are checked.

Your written price is freeEach unit that fits, with its vent route, is given its own price for free, side by side.
Locally owned and operatedYour installer is locally owned and can service the gas fireplace in Williston later on.
No hidden fees, all upfrontNo hidden fees: vent parts, framing checks and startup are all on the written price.

Call (352) 675-6366 Get a Free Inspection

Vertical rise and horizontal run

Vent tables tie the pipe's horizontal run to its vertical rise. A longer run needs more rise before it, so the exhaust has the lift to carry it out.

Each elbow counts against the allowed length, and the tables set minimums as well as maximums. A route that falls outside the table can starve the fire of air or push exhaust back.

Our pros sketch the route with its rises, runs and elbows and check it against your unit's table before anything is cut. The sketch goes on your quote, so the installer and you are looking at the same plan.

Keeping the controls reachable

The valve, receiver and connections of a gas fireplace sit in a compartment behind a lower grille. The fuel gas code says panels, grilles and access doors that come off for normal servicing mustn't be attached to the building.

Built-ins, stone and cabinetry can box that compartment in if nobody plans for it.

Our pros design the finish so the grille comes off and the controls are reachable, and they check the finish trade's plans for it. It saves tearing out tile or trim the first time the unit needs service, and it's shown on the plan. The grille stays removable.

Fitting the barrier screen

The glass on these units gets hot enough to burn. The 2015 revisions to ANSI Z21.88 and Z21.50 brought in barrier screens for units whose glass exceeds a set temperature, and newer units ship with one that's meant to stay installed.

During installation, the barrier is fitted and checked to sit properly in front of the glass. It's easy to leave off when the finish is going on, and it shouldn't be.

In homes with children or pets, it's one of the most important parts of the whole installation, and it's pointed out at handover. If the screen is ever removed for cleaning, it goes back ahead of your next fire.

Free Inspection

Your free gas planning visit

Walls where a direct-vent unit could vent straight out
Framing dimensions and header height from the manual
Floor under the unit and what the manual wants beneath it
Access to the control compartment once the finish is on

Claim 10% off your first service

Reserve the planning visit today and claim 10% off the first install that follows.

Call (352) 675-6366 Get a Free Inspection

FAQs

Gas installs, briefly

Will a gas fireplace need power to run?

Many do, for ignition, a blower or a receiver, and some run on batteries. The manual says what's needed, and an electrician installs any new circuit.

What's the difference between a heater and a decorative unit?

Heaters are listed to ANSI Z21.88 and built to warm the room; decorative units are listed to ANSI Z21.50 and put the look of the flame first. Our pros show you both. Talk to us about which suits you in Williston at (352) 675-6366.

Our Services