Need a chimney inspection in Rochelle?

Local, free and thorough. A chimney inspection in Rochelle that ends with clear answers and prices you can hold us to.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Understand the findings before agreeing to work

An inspection should help you understand the condition of the parts that can be examined. Ask which areas were accessible, what remains uncertain and whether anything needs further investigation before the fireplace is used.

Our pros explain their findings and price proposed repairs in a free written estimate. You can ask about the reason for each item and the order in which work should be considered. Keep the estimate so you can review the scope in your own time. To arrange a chimney inspection in Rochelle, reach us at (352) 675-6366.

Rochelle is an inland service location, separate from the sea coast. Rochelle is about 10 miles from the Gainesville reference point, measured in a straight line.

What's Included

Everything the inspection covers in Rochelle

Crown and cap looked over up on the roof
Smoke chamber and damper looked at through the throat
Flashing inspected on every side of the chimney
Stove connectors and thimbles checked against NFPA 211

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Metal chimneys and their chase tops

With a factory-built fireplace, your home in Rochelle has a framed chase and a metal top. Away from salt, that top wears from water pooling on it and from seams that open over time. Our pros check the chase top for low spots, rust and loose seams, look at the storm collar around the pipe, and read the rating plate to make sure every part matches the listing.

How It Works

The yard, the roof and the attic in Rochelle

A few questions, then outside

We ask what you've noticed, then check the chimney from the ground and the roof.
Inside, firebox to flue

Firebox, hearth, damper, smoke chamber and flue get a light and a mirror, and you can watch.
Attic and connections

Clearances, fireblocking and any stove or insert connection within reach are checked.
Findings in writing

Our pros explain the findings and provide a written estimate for any proposed repairs.

Why Choose Us

Inspections you can watch in Rochelle

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Our pros inspect to NFPA 211 and the Florida Building Code, and name the rule when it matters.

Free inspection firstInspecting costs you nothing for homes in Rochelle; you only pay for repairs you choose to make.
Locally owned and operatedWe're locally owned, so the pro who inspected your chimney can return for the repair.
Same-day service is availableSame-day inspections are available when the schedule has room, handy before a closing.

Call (352) 675-6366 Get a Free Inspection

Where the pipe enters the chimney

A stove connector joins the chimney through a thimble, a fireclay, refractory or metal sleeve set in the masonry. The Florida Building Code wants it built so the connector can't pull out of the wall or poke into the flue past the liner.

We check that the thimble is solid, that the connector fits it snugly, and that the pipe stops at the inner face of the liner. A pipe pushed too far into the flue narrows it and catches deposit. A loose thimble lets smoke leak into the room. Both are worth fixing, and you'll get prices for each.

Reading the rating plate on a factory-built unit

Factory-built fireplaces are listed and labeled after testing as a complete system to UL 127, and the Florida Building Code requires them to be installed the way the listing says. The rating plate, found inside the firebox or behind a panel, names the model and the parts that belong with it.

From there, the firebox panels, the metal chimney, the cap and the chase top are compared with the parts list in the manual. A replacement cap or pipe from another brand breaks the listing. If parts are missing or mismatched, you'll hear which ones and what the correct replacements cost from the maker.

Furnace and water heater flues in the chimney

Venting a gas furnace or water heater through masonry takes a lining made for that appliance. Under the Florida Building Code, a masonry chimney needs a lining suited to the appliance it serves, and a flue built for a wood fireplace can be too big or the wrong material for gas exhaust.

An oversized flue lets gas exhaust cool and condense, and that moisture works on the mortar from the inside. Our pros check how each appliance flue is lined and sized and look for signs of condensation. If a liner is needed, the options are priced separately, sized to the appliance's own instructions.

Free Inspection

What the free inspection takes in

Crown surface, slope and the seal around the flue tile
Walls of the smoke chamber above the damper, checked with a light
Damper operation, from fully open to fully sealed
Water clues inside, from rust to white deposits and odor

Claim 10% off your first service

Inspecting costs nothing, and a first service gets a 10% discount.

Call (352) 675-6366 Get a Free Inspection

FAQs

Getting ready for a chimney inspection

Can I watch while you inspect?

Please do. You're welcome at the hearth while our specialists work inside, and they'll show you the damper, the smoke chamber and the flue with a light. Roof work stays with our pros for safety.

Can a factory-built fireplace be inspected too?

Absolutely. The rating plate comes first, then our pros go through the firebox panels, the metal chimney, the cap and the chase top with the maker's manual in hand. Replacement parts are quoted from the maker's own list.

Our Services