Installing fireplaces for homes in Micanopy

Tired old fireplace? Get a free inspection in Micanopy and a new unit installed to its listing.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Glass doors on the new fireplace

Want glass doors on the new fireplace? On a factory-built unit, only doors listed for that model can be fitted. On a masonry fireplace, doors are made to fit the opening.

Our specialists choose the doors with the fireplace, so they match the listing and the opening from day one. Doors change how a fireplace draws, and fitting the wrong ones later can cause smoke or overheating. The doors are priced with the unit. Choosing both together saves a second trip later. Call our pros about doors for your new fireplace in Micanopy: (352) 675-6366.

The Gainesville reference point is roughly 13 miles from Micanopy as the crow flies. In our service area, Micanopy is grouped with Alachua County.

What's Included

Unit, vent, hearth and surround

Direct-vent gas fireplaces planned with their vent route
Electric fireplaces mounted, recessed or inserted
Insulation shields fitted where the chimney meets insulation
Clearances checked before the walls are closed

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Trees near a new chimney

If trees stand close to where a new chimney would leave the roof of your home in Micanopy, their limbs can drop leaves onto the cap and rub against it in wind. Our pros consider nearby trees when choosing where the chimney exits, and they'll suggest trimming limbs that would sit too close to the new cap. A clear cap keeps the new fireplace drawing well.

Our Process

Four stages of a new fireplace

Look at the room

The wall, floor, attic and roof are looked at, then the fireplace options that fit are laid out.
Plan and price

You choose a unit, and the quote lists every part, trade, permit and inspection.
Install and check

The unit and its chimney or vent go in to the manual, with clearances checked before walls close.
Test and hand over

The unit is tested, you're shown how to use it, and you get the break-in steps noted on the quote.

Why Choose Us

Planning comes before any sale

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Floors and furniture are covered, and the room is cleaned before our pros leave.

Your written price is freeEach fireplace option for your room is given its own price, free and side by side.
Family owned and runFamily-run planning for your fireplace in Micanopy, as careful as if it were going in our own home.
100% satisfaction, guaranteedThe install isn't done until you're happy with it. That's our 100% satisfaction guarantee.

Call (352) 675-6366 Get a Free Inspection

Installing to the listing

A factory-built fireplace and chimney must use the components and arrangement permitted by their applicable listing and instructions. The labels identify the actual system. Our pros check that information before choosing pipe, supports, shielding or a termination.

The permitted components are identified by the appliance and chimney instructions. A compatible part may be specifically named by its system or manufacturer; matching dimensions or a similar appearance alone does not establish approval. Substitutions need to be checked before installation.

The maker's manual stays on hand throughout the job and a copy stays with you, with the model and parts recorded on your quote.

How deep a masonry firebox has to be

Firebox proportions depend on the fireplace design. Standard masonry and Rumford-style arrangements have different requirements, and depth must be considered with the opening, throat and flue. Our pros discuss the proposed design before choosing dimensions or pricing the masonry.

Opening size, depth, throat and flue need to be planned together. Our pros explain the proposed arrangement and any questions that must be resolved before construction, rather than promising draft performance from a single dimension.

A Rumford-style fireplace has its own proportions and may be worth discussing where that design suits the project. Its appearance, construction and venting requirements belong in the planning conversation before it is compared with a standard masonry fireplace.

Where the chimney leaves the roof

A factory-built chimney passes through the roof with parts from its maker: a roof support where needed, a sealed storm collar and the listed termination cap on top. Its height above the roof follows the maker's rules for distance from nearby roof surfaces.

The roofing around the new opening has to be weathered in so it doesn't leak, and on many roofs that's a roofer's job, working with the maker's roof parts.

With the opening cut and the listed parts fitted, our pros coordinate with your roofer so the roofing is sealed properly around the new chimney. The quote shows who handles each part.

Free Inspection

Wall, floor, attic and roof, checked free

Attic framing and insulation along a possible chimney route
Outside wall options for a gas unit that vents straight out
Hearth extension size and material for the unit chosen
Roof type and where the chimney would leave it

Claim 10% off your first service

Add a fireplace in Micanopy, and a first install is 10% off.

Call (352) 675-6366 Get a Free Inspection

FAQs

Your fireplace installation questions, answered

Can you install a fireplace in Micanopy?

Yes. Our installers work in Micanopy, and the planning visit that covers the room, the attic space and the roofline is free. Have a spot in mind for the fireplace? Share it on the phone.

Can you replace my old factory-built fireplace?

We can. The old rating plate shows what you have, the maker's current line shows what's offered, and our pros plan a replacement that's listed with its chimney. Talk to us about your replacement in Micanopy at (352) 675-6366.

Our Services