Gas fireplace repair around LaCrosse, FL

Won't light, won't stay lit or burns oddly? Local pros find the cause in LaCrosse with a free inspection and the unit's manual.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Logs that are broken or out of place

Moved the logs while cleaning, or noticed one cracked? Every gas log set has a layout in its manual, and a log out of place can block the flame and make soot. Makers warn against burning with a cracked log.

Our specialists set the logs back to the maker's diagram, replace broken ones with the maker's logs, and check the ember material and flame pattern afterwards. They'll also show you where the diagram is, so the next cleaning doesn't move things. A photo of the layout on your phone helps too. Reserve a log reset and check in LaCrosse by phoning (352) 675-6366.

LaCrosse is on our Alachua County list of places we serve. When the 2020 Census counted LaCrosse, it found 316 residents.

What's Included

Switch, sensors, valve and glass

Valves replaced only when the readings say so
Burners and pilots cleaned of lint and dust
Barrier screens checked or added where offered
Vent leaks and pitch problems corrected

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Plants growing over the termination

Shrubs and vines around the outside vent of a gas fireplace in LaCrosse can grow close enough to crowd the termination. The maker's manual sets clearances around it for a reason. Our specialists check the termination's surroundings and tell you what needs trimming back, so the unit can draw air and vent freely. The clearances from the manual are noted on the quote.

How It Works

Tested before any part is swapped

Watch it and read the plate

Our pros see the fault happen, then read the rating plate and pull up your unit's manual.
Test from switch to valve

Switch, receiver, sensors and ignition are tested in order, with readings recorded.
Repair with listed parts

The failed part is replaced with the maker's listed part, or the cause is cleaned and adjusted.
Check the whole unit

Checks appropriate to the model are completed and explained before any further work is proposed.

Why Choose Us

Gas fireplaces repaired to the manual in LaCrosse

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Your unit's own manual guides the repair, from the troubleshooting chart to the log diagram.

Your price, upfrontYou see the fault and the price for your gas fireplace in LaCrosse before any part is ordered.
Same-day service is availableSame-day repair visits are available when the schedule allows and the part is on hand.
Our workmanship warrantyNew parts keep the maker's warranty, and our workmanship warranty sits on the repair itself.

Call (352) 675-6366 Get a Free Inspection

What a healthy flame looks like

Each gas fireplace manual describes, and in most cases pictures, how the flame should look once the unit has warmed up. Many log sets are designed with yellow, lively flames, and some burners show more blue, so the manual is the reference for your unit.

Our specialists let the unit run long enough to settle, then compare the flame with the manual. Soot on the logs or glass, flames lifting off the burner, or a flame much bigger or smaller than pictured all point to a cause.

From there, they check logs, burner ports, air shutter and pressure in turn, and record only what they've measured.

Spill switches on chimney-vented units

Units that vent through a chimney, rather than a sealed direct vent, use a draft hood, and many have a spill switch mounted near it. If exhaust spills out of the draft hood instead of rising up the vent, the switch heats up and shuts the gas valve.

Some spill switches reset on their own when they cool; others need a manual reset. A unit that keeps shutting off is telling you the vent isn't drawing properly.

The cause might be a blocked vent or a house pulling air down it, and that's what gets fixed. Bypassing the switch isn't an option.

Fireplace blowers and their switches

Lots of gas fireplaces carry a blower that pushes warm air out into the room. It's switched on by a temperature switch that senses the firebox warming up, or by the control board on newer units.

When the blower won't start, the switch, the wiring or the motor can be the cause. When it's noisy, worn bearings or a fan caked in dust and hair are the likely suspects.

Our specialists test each part, clean the fan, and replace a worn motor or switch with the maker's part. A working blower sends a lot more of the fireplace's heat into the room.

Free Inspection

Your gas unit, tested free

Shape of the pilot flame against the manual's drawing
Wall switch, remote and receiver, plus the batteries in each
Where each log sits, and any logs that are cracked or broken
Vent joints, their pitch and the termination outside

Claim 10% off your first service

The first gas fireplace repair we make for you is 10% off when you book today.

Call (352) 675-6366 Get a Free Inspection

FAQs

Gas fireplace fixes, answered

Can my fireplace be switched to propane?

With the maker's conversion kit for your model, yes. Our pros fit it and set the pressures to the rating plate; supply changes go to a gas contractor or your supplier. Talk to us about it in LaCrosse at (352) 675-6366.

Do gas fireplaces need yearly service?

Follow the service interval in your appliance's manual. Our pros can discuss that model's checks and any symptoms you've noticed before arranging the visit.

Our Services